PARTICIPANT REGULATIONS
1) All drivers must be at least 16 years old. Drivers under the age of 18 years old must have parents or guardian sign
waiver and release form for minors.
2) All persons must sign a waiver and release form and purchase a pit pass before entering the pits.
3) No one will be allowed in any derby if they are under the influence of drugs or alcohol.
BODY REGULATIONS
1) COMPACT TRUCKS: Any 2 or 4 wheel drive mini trucks, Jimmy's or Bronco II allowed. No V8 allowed - just 4 and
6 cylinders.
2) Four wheel drive models will only be allowed to run one drive shaft.
3) No body lifts or suspension lifts allowed.
4) All trucks must have drivers door painted white and number must appear on both sides. No profanity will be allowed
to be displayed on the truck.
5) All glass and chrome must be removed.
6) All trucks must have seat belts.
7) All loose objects must be removed from the cab and bed.
8) Battery must be relocated to the front floorboard and securly fastened and covered. Any size battery may be used.
9) All trucks must have radiator in stock position.
10) Doors may be welded, chained, wired or banded.
11) Beds can be mounted in factory mounts. No additional bolts or welds, rubber mounts may be removed. Factory beds only.
12) The back of the cab may be welded to the bed, tailgates may be welded. No other reinforcing will be allowed.
13) One piece of pipe may be put behind the seat, One piece may be used in the dash.
14) Stock gas tank must be removed and replaced with an internal tank. Tank must be mounted in the cab or in the center
of bed directly behind the cab, securely fastened and well covered.
15) Bumpers must be stock. No homemade bumpers.
16) Hoods must have a 12X12 inch hole in center.
17) All hoods must be opened for inspection. Hoods may be fastened with wire, chains or band in four places, no bolts
or no welds.
18) All frames must be stock. No reinforcing the frame. You may weld a plate on frame, on one side, if the frame
is broken or rusted. No over kill.
19) Trailer hitches must be removed.
20) A-arms may be welded.
21) No adding extra leaf springs. Springs must be factory. You may add spring stiffeners to coil springs. Do not weld
leaf springs.
